2017

 
  • Influence  of NMP Concentration on Drug Release Behavior from PLGA Based In-Situ Forming Implants
    S. Bazraee, H. Mobedi, A. Mashak, A. Jamshid
    12th International Seminar on Polymer Science & Technology (ISPST 2017)
  • In The Effect of Solvent Type on Bupivacaine HCL Release from In-Situ Forming Implants Based on SAIB/PLGA
    S. Bazraee, H. Mobedi, A. Mashak, A. Jamshid
    12th International Seminar on Polymer Science & Technology (ISPST 2017)

 

 2016

  • Study on Bupivacaine HCL Release from a SAIB/PLGA In-Situ Forming Implant
    S. Bazraee, H. Mobedi, A. Mashak, A. Jamshid
    14th Iranian Pharmaceutical Sciences Congress (IPSC 2016)

 

2015

  • Investigation of Effect of Various Drug Loading on Buprenorphine Hydrochloride release from In situ forming Systems based on PLGA polymers
    M. Hosseini, H. Mobedi, A. Jamshid
    15th Iranian National Congress of Chemical Engineering (IChEC 2015) 
  • Formulation of a Polymeric PLGA-Injectable ImplantDelivery System for Controlled Release of Famotidine
    F.Banihashemi, H.Mobedi, J.Barzin
    15th Iranian National Congress of Chemical Engineering (IChEC 2015)
  • Morphological investigating of in-situ forming drug delivery systems based on saib-PLGA
    S. Bazraee, H. Mobedi, A. Mashak, A. Jamshid
    15th Iranian National Congress of Chemical Engineering (IChEC 2015)
  • The use of biocompatible polymer nanoparticles containing magnetic nanoparticles as contrast agents in MRI
    A.R. Faramarzi, J. Barzin, H. Mobedi
    Nanomedicine in diagnosis and treatment of hard to treat diseases
  • Preparation of biocompatible PLGA fine particles containing magnetite in MRI
    A.R. Faramarzi, J. Barzin, H. Mobedi
    Nanomedicine in diagnosis and treatment of hard to treat diseases

 

2014

  • Effect of Drug on the Dynamic Mechanical Thermal Properties of Poly (L-lactide)
    A. Mashak, H. Mobedi.
    11th International Seminar on Polymer Science and Technology
  • Aqueous stability of Leuprolide Acetate: Effect of temperature, dissolved oxygen, pH and complexation with β-cyclodextrin
    M. Rahimi, H. Mobedi, A.A. Behnamghader
    11th International Seminar on Polymer Science and Technology
  • Effect of surface nodular structure on the PDMS/PES based mambranes pervaporative performances in ethanol/water separation
    M. Jafarinasab, J. Barzin, H. Mobedi, H.R. Mortaheb, G.R. Salehi Jouzani, S. Abbasalizadeh
    11th International Seminar on Polymer Science and Technology
  • Microsphere embedded matrix: a new method for drug co-therapy
    M. Jafari-Nodoushan, J. Barzin, H. Mobedi
    11th International Seminar on Polymer Science and Technology
  • Morphological evaluation of in situ forming polymeric scaffold for tissue engineering applications
    M.Hajihasani Biouki, H. Mobedi, A.Karkhaneh
    11th International Seminar on Polymer Science and Technology
  • Effect of solvent type on in vito Lidocaine HCl release from PLGA-based in situ forming systems
    M. Namvar, H.mobedi, A.Mashak
    11th International Seminar on Polymer Science and Technology
  • Poly (D, L-lactide-co-glycolide)/ N-methyl-2-pyrrolidone Sol-Gel system for prolonged delivery of Buprenorphine Hydrochloride
    M. hosseini, H. mobedi, A. jamshidi
    11th International Seminar on Polymer Science and Technology
  • Investigation of effect of various drug loading and addition of a rate modifying agent on Famotidine release from in situ forming implants
    F. banihashemi, H. mobedi, J. Barzin
    11th International Seminar on Polymer Science and Technology
  • Design of a Combined Morphine Delivery System (Morphine Microsphere- ‎Embedded In-Situ Forming)‎
    M. Jafari-Nodoushan, J. Barzin, H. Mobedi
    The 1st Middle East (MECRC 2014) & The 6th Iranian Controlled Release Society ‎Conference (ICRC 2014)
  • Electrospraying: A Tuneable Method of Microparticle Production
    M. Jafari-Nodoushan, H. Mobedi, J. Barzin
    The 1st Middle East (MECRC 2014) & The 6th Iranian Controlled Release Society ‎Conference (ICRC 2014)
  • Incorporation of HAS Microparticles within the Taxol-Loaded In situ Forming PLGA ‎Microspheres: Drug Release
    M. S. Amini-Fazl, H. Mobedi, J. Barzin, H. Abedini
    The 1st Middle East (MECRC 2014) & The 6th Iranian Controlled Release Society ‎Conference (ICRC 2014)
  • Design of Support Layers based on PES Membrane to Improve the Permeability Performance
    M. Jafarinasab, J. Barzin, H. Mobedi, H. R. Mortaheb, G. R. Salehi Jouzani, S. ‎Abbasalizadeh
    The 8th International Chemical Engineering Congress & Exhibition (IChEC 2014)

 

2013

  • Prediction of Crystallization Rate for PLLA/La and PLLA Systems under ‎Isothermal Condition using Dynamic Data
    F. Ravari, A. Mashak, M. Nekoomanesh, H. Mobedi
    16th Iranian Physical Chemistry Conference
  • Isoconversional Kinetic Analysis of Non-isothermal Cold Crystallization
    F. Ravari, A. Mashak, M. Nekoomanesh, H. Mobedi
    16th Iranian Physical Chemistry Conference
  • Crystallization Kinetic ofl Poly (L-lactide): Lauritzen-Hoffman Theory
    A. Mashak, M. Nekoomanesh, H. Mobedi, F. Ravari
    The 16th Iranian Chemistry Congress

 

2012

  • Effect of Surface Roughness on the Prevaporative Performance of PDMS/PES Composite Membranes for Ethanol/ Water Separation
    M. Jafarinasab, J. Barzin, H. Mobedi, H. R. Mortaheb, G. Salehi Jouzani, S. Abbasalizadeh
    The 14th Iranian National Chemical Engineering Congress (IChEC 2012)
  • A study of the influence of drug loading level on the morphology and burst release in the in situ forming matrices
    Mina Hajihasani Biouki, Hamid Mobedi
    ISPST2012
  • Synthesis of Poly hydroxybutyrate-Polyethylene glycol-Folic acid(PHB-PEG-FOL) nanoparticles for targeted drug delivery
    M. Rafienia, M. Sattari, H. Mobedi, M. Mahmoudzadeh, A. Fassihi
    ISPST2012
  • A study of te influence of drug loading level on the morphology and burst release in the in situ forming matrices
    Mina Hajihasani Biouki, Hamid Mobedi
    ISPST2012
  • Effect of Polymer Blending on Morphology and Initial Burt Release of an in Situ-Forming Drug Delivery System
    M. Jafari-Nodoushan, T. Ebrahimi, H. Mobedi, J. barzin
    ISPST2012
  • Controlled Release of Paclitaxel from In situ-Forming PLGA Gel
    M. Sadegh Amini-Fazl, H. Mobedi, J. Barzin
    ISPST2012
  • Monitoring the Effect of Flow rate on Size and Morphology of Microspheres Produced by the Means of Electrospraying Method
    M. Jafari-Nodoushan, H. Mobedi, J. Barzin
    ISPST2012
  • Evaluation of Naltroxone Release Kinetic from In Situ-Forming Drug Delivery System (Investigating the Effect of Polymer End Group Functionality)
    M. Jafari-Nodoushan, T. Ebrahimi, J. Barzin, H. Mobedi
    ISPST2012
  • Non-isothermal Cold Crystallization Behavior and Kinetic of Poly(L-lactide): Effect of L-lactide Dimer
    A. Mashak, M. Nekoomanesh, H. Mobedi, F. Ravari
    ISPST2012

 

2011

  • Organic/Inorganic Hybrid Polymer Nanocomposites based on Polycaprolactone Diacrylate/Polyhedral Oligomeric Silsesquioxane: Synthesis, Characterization and Double Bond Conversion Studies
    H. Askari, S. A. Mirmohammadi, M. Imani, M. Ataei, H. Mobedi
    The 7th International Chemical Engineering Congress & Exhibition (IChEC 2011)
  • Investigation Expert System Parameters on Modeling Performance of in Situ Forming Controlled Drug Delivery System
    A.Haghighat Mesbahi, D. Semnani, J. Barzin, H. Mobedi
    PPS 2011
  • Polycaprolactone/Polyhedral Oligomeric Silsesquioxane Hybrid Organic/Inorganic Nanocomposites: Mechanical and Nanomechanical Analyses
    H. Askari, S. A. Mirmohammadi, M. Imani, M. Ataei, H. Mobedi
    PPS 2011
  • Poly (e-caprolactone diacrylate)/Polyhedral Oligomeric Silsesquioxane Hybrid Organic/Inorganic Nanocomposites: Thermal Studies
    H. Askari, S. A. Mirmohammadi, M. Imani, M. Ataei, H. Mobedi
    PPS 2011

 

2010

  • Nano-Mechanical Properties & Biomedical Application of Biodegradable Hybrid Organic-Inorganic Nanocomposites Based on Unsaturated Polyester Resins & Polyhedral Oligomeric Silsesquioxane
    M. Imani, M. Atai, H. Mobedi, H. Askari
    3th Conference on Nanostructures

 

2009

  • Influence of poly(lactide-co-glycolide) type and Gamma irradiation on the betamethasone acetate release from the in situ forming systems
    M. rafienia, H. Mirzadeh, H. mobedi, A. jamshidi
    16th Iranian Conference of Organic Chemistry
  • H-NMR analysis of biodegradable polymeric systems based on poly (lactide-co-glycolide) and their drug release behaviours
    Z. Mohammadnia, E. Ahmadi, H. Mobedi
    16th Iranian Conference of Organic Chemistry
  • Crystallization Behavior of Poly (L-lactide) Films Containing Mg (OH) 2 and L-lactide
    A. Mashak, M. Nekoomanesh, H. Mobedi, R. Dinarvand
    9th International Seminar on Polymer Science and Technology
  • Photo Cured Nanocomposites based on Poly (hexamethylene carbonate-co-fumarate) and POSS: Thermal and Mechanical Properties
    N. Khadem Mohtaram, M. Imani, S. Sharifi, M. Atai, H. Mobedi
    9th International Seminar on Polymer Science and Technology
  • The study of GPC conditions on molecular weight determination of poly (lactide-co-glycolide)
    H. Farrokhzad, A. Poorkhalil, J. Barzin, A. Mashak, H. Mobedi
    9th International Seminar on Polymer Science and Technology
  • Modeling of betamethasone release properties from in situ forming systems based on PLGA
    S. Sarraf, E. Marzband, H. Mobedi, M. Rafienia, H. Mirzadeh, A. Jamshidi
    36th Annual Meeting & Exposition of the controlled Release Society
  • Influence of L-lactide on the In vitro degradation of poly (L-lactide) films
    H. Mobedi, M. Nekoomanesh, H. Orafaei, A. Mashak
    36th Annual Meeting & Exposition of the controlled Release Society

 

2008

  • Characterization of Mixed Poly (lactide-co-glycolide) Injectable Implant for the Three Months Controlled Release of Leuprolide Acetate
    M. Enayati, H. Mobedi, H. Mirzadeh, S. Hojati Emami, A. Nateghi
    6th World Meeting on Pharmaceutics, Biopharmaceutics & Pharmacetical Technology
  • Effect of Nano-Hydroxyappatite on Poly (lactide-co-glycolide) Degradation as an In-situ Forming Implant
    M. Enayati, H. Mobedi, H. Mirzadeh, S. Hojjati-Emami
    35th Annual Meeting & Exposition of the Controlled Release Society

 

2007

  • Gamma irradiation effects on the release of betamethasone from the biodegradable in situ forming systems
    M. Rafienia, H. Mirzadeh, H. Mobedi, A. Jamshidi
    International Seminar on Polymer Science & Technology, ISPST 2007
  • Investigation of drug release & H-NMR analysis of the in situ forming systems based on poly (lactide-co-glycolide)
    Z. Mohammadnia, E. Ahmadi, M. Rafienia, H. Mobedi, A. Nouri
    International Seminar on Polymer Science & Technology, ISPST 2007
  • In vitro Releasing of Leuprolide Acetate Loaded on a PLGA Sol-Gel System
    R. Mashayekhi, H. Mobedi
    International Seminar on Polymer Science & Technology, ISPST 2007
  • Synthesis & Characterization of Photo Crosslinkable Macromers Based on Polycaprolactone Diacrylate & POSS as Potential Organic-Inorganic Nanocomposites for Biomedical Applications
    H. Askari, S. Sharifi, M. Imani, M. Atai, H. Mobedi
    21st European Conference on Biomaterials
  • The Effect of Propylene Glycol & Ethyl Acetate on Hydrophobic Naltrexone Released from an In Situ Injectable System
    V. Vahabzadeh, H. Mobedi, M. J. Abdekhodaei, H. Mivehchi
    3rd Iranian Conference of Novel Drug Delivery Systems
  • The Type & Loading Effects of Naltrexone on its Release from an In Situ Forming Injectable System
    V. Vahabzadeh, H. Mobedi, M. J. Abdekhodaei, H. Mivehchi
    3rd Iranian Conference of Novel Drug Delivery Systems
  • A Novel Organic-Inorganic Hybrid Nanocomposite based on Poly (e-Caprolactone diacrylate) & Polyhedrial Oligomeric Silsesquioxane for Biomedical Applications
    H. Askari, S. Sharifi, M. Imani, M. Atai, H. Mobedi
    7th Int’l Symposium on Fronties in Biomedical Polymers

 

2006

  • Carrageenan-alginate (Calargi) IPNs: The hydrogel bead preparation & characterization
    Z. Mohammadnia, M. J. Zohuriaan-Mehr, K. Kabiri, A. Jamshidi, H. mobedi
    13th Iranian Seminar of Organic Chemistry
  • Carrageenan-alginate (Calargi) IPN Beads for control release of anti-inflammatory drug
    Z. Mohammadnia, M. J. Zohuriaan-Mehr, K. Kabiri, A. Jamshidi, H. mobedi
    13th Iranian Seminar of Organic Chemistry
  • Pathological studies of leuprolide acetate loaded on a PLGA sol-gel system
    R. Mashayekhi, H. mobedi, H. Mivehchi
    10th Iranian Pharmaceutical Sciences Conference (ISPC 2006)
  • Controlled delivery of betamethasone from injectable in situ forming biodegradable PLGH system (in vitro study)
    M. Rafienia, H. mirzadeh, H. mobedi, A. jamshidi, S. Bonakdar
    10th Iranian Pharmaceutical Sciences Conference (ISPC 2006)
  • Ionically crosslinked alginate/carrageenan beads for control release of betamethasone acetate anti-inflammatory drug
    Z. Mohammadnia, M. J. Zohuriaan-Mehr, K. Kabiri, A. jamshidi, H. mobedi
    10th Iranian Pharmaceutical Sciences Conference (ISPC 2006)
  • Releasing of leuprolide acetate loaded on a PLGA (50:50) Sol-gel system: Part II. In vivo studies
    R. Mashayekhi, H. mobedi, H. Mivehchi
    10th Iranian Pharmaceutical Sciences Conference (ISPC 2006)
  • Releasing of leuprolide acetate loaded on a PLGA (50:50) Sol-gel system: Part I. In vitro studies
    R. Mashayekhi, H. mobedi, H. Mivehchi
    10th Iranian Pharmaceutical Sciences Conference (ISPC 2006)
  • Formulation of an injectable implant for peptide delivery: effect of polymer molecular weight on release, erosion & morphology behavior
    Z. Mohammadnia, M. J. Zohuriaan-Mehr, K. Kabiri, A. jamshidi, H. mobedi
    33rd Annual Meeting of Exposition of the Controlled Release Society
  • Studying the Effect of Ethyl Heptanoate on Release Profile of Leuprolide Acetate in an in situ Forming Controlled Release System
    H. mobedi, M. Zare, A. jamshidi, H. Mivehchi
    33rd Annual Meeting of Exposition of the Controlled Release Society
  • In Vitro & In Vivo Comparison of Releasing Leuprolide Acetate Loaded on a PLGA (50:50) In Situ Forming System
    R. Mashayekhi, H. mobedi, H. Mivehchi
    13th Inter. Pharm. Technol. Symp

 

2005 and before

  • Study of Poly (D, L lactide-co-glycolide) 50:50 Implant Morphology During Degradation in Aqueous Media
    T. Darestani, A. A. Entezami, H. Mobedi, M. Abtahi
    Biopolymers& Polymers in Medicine, ISPST 2005, Tehran, Iran
  • Effect of End Group on Degradation of poly (D, L-lactide-Co-glycolide) 50:50 in Aqueous Media
    T. Darestani, A. A. Entezami, H. Mobedi, M. Abtahi
    Biopolymers& Polymers in Medicine, ISPST 2005, Tehran, Iran
  • NMP Removal from PLGA-Injectable Implant Systems
    R. Bakhshi, E. Vasheghani Farahani, H. Mobedi, M. Khakpour
    Polymeric Product of Petrochemical Industries, ISPST 2005
  • Solvent Removal from an In-situ Forming Drug Delivery System
    R. Bakhshi, E. Vasheghani Farahani, H. Mobedi
    The 4th International Postgraduate Research Symposium on Pharmaceutics IPORSIP-2004
  • ATR-FTIR Detection of Naltrexone in Pharmaceuticals
    M. Khanmohammadi, H. Mobedi, E. Mobedi, K. Kargosha
    13th Iran’s Seminar of Analytical Chemistry
  • In-Vitro Degradation of Poly (D, L- Lactide -Co- Glycolide) 50:50 and Release of Naltrexone from PLGA Implants
    T. Darestani, Farahani, H. Mobedi, A. Entezami
    International Union of Pure and Applied Chemistry World Polymer Congress, MACRO 2004
  • In -Vitro Degradation of Poly (L, D -lactide-co-glycolide 50:50)
    T. Darestani, Farahani, H. Mobedi, A. Entezami
    Proceedings of the 6th Iranian Seminar on Polymer Science and Technology (ISPST 2003)
  • Effect of Mg (OH)2 on Poly (L,D-lactide-co-glycolide 50:50) Degradation
    T. Darestani, A.A. Entezami, H. Mobedi
    Proceedings of the 6th Iranian Seminar on Polymer Science and Technology (ISPST 2003)
  • Release of Naltrexone from Poly (L, D-lactide-co-glycolide 50:50) Implant
    T. Darestani, A.A. Entezami, H. Mobedi
    Proceedings of the 6th Iranian Seminar on Polymer Science and Technology (ISPST 2003)
  • Sustained-Release Biodegradable Implant for Delivery of Naltrexone: Effect of Durg Loading
    T. Darestani, Farahani, H. Mobedi, A. Entezami
    Proceedings of the 6th Iranian Seminar on Polymer Science and Technology (ISPST 2003)
  • Role of Magnesium Hydroxide on Poly (l-Lactide) Degradation (ii) Microscopy Study
    H. Mobedi, M. Nekoomanesh, H. Orafaei
    British Pharmaceutical Conference
  • A New HPTLC Method for Determination of Polymer Additives
    S. Honary, H. Mobedi, H. Galili
    Pharmacy and Pharmaceutical Sciences World Congress 2002, 62nd Congress of FIP
  • Study on Preparation of Intranasal Insulin
    H. Mobedi, T. Ghafghazi, M. Anni
    Proceeding of 8th Iranian Seminar of Pharmaceutical Sciences (ISPS 8)
  • Role of Magnesium Hydroxide on Poly (L-Lactide) Degradation (I) Effect of Molecular Weight
    H. Mobedi, M. Nekoomanesh, H. Orafaei
    29 Annual Meeting and Exposition of the controlled Release Society